EasyManuals Logo

NETGEAR Wireless-N User Manual

NETGEAR Wireless-N
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
7-11 Fine-Tuning Your Network
v1.0, January 2010
Advertisement Time To Live. The time to live for the advertisement is measured in hops
(steps) for each UPnP packet sent. The time to live hop count is the number of steps a
broadcast packet is allowed to propagate for each UPnP advertisement before it
disappears. The number of hops can range from 1 to 255. The default value for the
advertisement time to live is 4 hops, which should be fine for most home networks. If you
notice that some devices are not being updated or reached correctly, then it might be
necessary to increase this value.
UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each UPnP
device that is currently accessing the router and which ports (Internal and External) that
device has opened. The UPnP Portmap Table also displays what type of port is open and
whether that port is still active for each IP address.
3. Click Apply to save your settings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Wireless-N and is the answer not in the manual?

NETGEAR Wireless-N Specifications

General IconGeneral
Wireless SpeedUp to 300 Mbps
Frequency Band2.4 GHz
VPN SupportNo
Antennas2 external antennas
SecurityWPA, WPA2, WEP
Ethernet Ports4 x 10/100 Mbps LAN ports, 1 x 10/100 Mbps WAN port

Related product manuals