EasyManuals Logo

NETGEAR Wireless-N User Manual

NETGEAR Wireless-N
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
2-11 Safeguarding Your Network
v1.0, January 2010
3. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your
choice.
4. The settings displayed on the screen depend on which security option you select.
5. For WPA-PSK or WPA2-PSK, enter the passphrase.
6. If prompted, enter the settings for the Radius server. For WPA-802.1x or WPA2-802.1x, these
settings are required for communication with the primary Radius server.
Primary Radius Server IP Address. The IP address of the Radius server. The default is
0.0.0.0
Radius Port. Port number of the Radius server. The default is 1812.
Shared Key. This is shared between the wireless access point and the Radius server
during authentication.
7. To save your settings, click Apply.
Figure 2-4
Note: Radius server only applies to WPA-802.1x, and not to Mixed WPA + WPA2.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Wireless-N and is the answer not in the manual?

NETGEAR Wireless-N Specifications

General IconGeneral
Wireless SpeedUp to 300 Mbps
Frequency Band2.4 GHz
VPN SupportNo
Antennas2 external antennas
SecurityWPA, WPA2, WEP
Ethernet Ports4 x 10/100 Mbps LAN ports, 1 x 10/100 Mbps WAN port

Related product manuals