RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
2-21 Safeguarding Your Network
v1.0, January 2010
The Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode options are reserved
for wireless testing and advanced configuration only. Do not change these settings.
• WPS Settings. These are Push 'N' connect settings used by the modem router when WPS
clients are added.
– Router’s PIN. The number that the modem router broadcasts when adding a WPS client
with the PIN method.
– Disable Router PIN. Selecting this checkbox disables the modem router’s PIN.
– Keep Existing Wireless Settings. This checkbox is cleared by default so that the modem
router network name (SSID) and security can be set automatically if Push 'N' Connect
(WPS) is used to set up the network. When the first WPS client is added, this checkbox is
automatically selected so that the SSID and security remain the same when additional
clients are added.
For information about adding WPS clients, see “Using Push 'N' Connect (WPS) to Configure
Your Wireless Network” on page 2-12.
• Restricting access by MAC address. You can use a Wireless Card Access List to restrict
access. See “Restricting Access by MAC Address” on page 3-3.
To Next Page
Loading...
Need help?
General
