Need help?Do you have a question about the NETGEAR WNDAP350 and is the answer not in the manual?
General| Brand | NETGEAR |
|---|---|
| Model | WNDAP350 |
| Category | Wireless Router |
| Language | English |
Provides recommendations for optimal placement of the access point to ensure good wireless coverage.
Guides on the initial physical and network setup before configuring the access point.
Step-by-step setup process for the WNDAP350 wireless access point.
Instructions for configuring the Ethernet port for LAN access.
Steps to confirm that wireless devices can successfully connect to the access point.
Instructions on how to access the WNDAP350 web interface using its default IP address.
Configuration of essential IP settings like IP address, subnet mask, and gateway.
Covers configuration of wireless parameters for 802.11b/bg/ng and 802.11a/na modes.
Detailed settings for the 802.11b/bg/ng wireless band, including SSID, channel, and mode.
Detailed settings for the 802.11a/na wireless band, including SSID, channel, and mode.
Steps to set up and verify basic wireless connection functionality.
Instructions on how to download and install new firmware for the access point.
Guide to changing the default administrator password for enhanced security.
Troubleshooting steps when the access point shows no power or activity lights.
Troubleshooting connectivity issues preventing internet or LAN access from wireless devices.
Steps to resolve issues preventing connection to the WNDAP350 for configuration.
Diagnosing and resolving time-out errors when accessing network resources.
Instructions on using the reset button to revert the access point to factory default settings.
To Next Page