Introduction
11
ProSAFE Dual Band Wireless N Access Point WNDAP350
System Requirements
Before installing the WNDAP350, make sure your system meets these requirements:
• A 10/100/1000 Mbps Local Area Network device such as a hub or switch
• The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it
• A 100-240 V, 50-60 Hz AC power source
• A Web browser for configuration such as Microsoft Internet Explorer 5.0 or above, or
Mozilla 3.0 or above
• At least one computer with the TCP/IP protocol installed
• 802.11a/n or 802.11b/g/n-compliant devices, such as the NETGEAR WG511 Wireless
Adapter
What’s In the Box?
The product package contains the following items:
• ProSAFE Dual Band Wireless N Access Point WNDAP350
• Power adapter and cord (12 V dc, 1.2 A)
• Straight through Category 5 Ethernet cable
• ProSAFE Dual Band Wireless N Access Point WNDAP350 Installation Guide
• Resource CD, which includes a link to this manual.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep
the carton, including the original packing materials, in case you need to return the firewall for
repair. To qualify for product updates and product warranty registrations, we encourage you
to register on the NETGEAR web site at http://www.netgear.com.
To Next Page
Loading...
