Basic Installation and Configuration
24
ProSAFE Dual Band Wireless N Access Point WNDAP350
Figure 10. Connecting to the Access Point
3. Click Login.
Your Web browser should automatically find the WNDAP350 wireless access point and
display the home screen.
Setting Basic IP Options
The basic IP settings for your wireless access point are entered on this screen. Most of the
default settings will work in most cases. However, if your wireless access point is part of a
more complex LAN network, then modify the settings to meet the requirements of your
network based on the explanation of the various fields.
To configure the basic IP settings of your wireless access point:
1. Under Configuration, select IP, and then IP Settings. The IP Settings screen displays
as shown in Figure 11, Basic IP options below.
Figure 11. Basic IP options
To Next Page
Loading...
Need help?
General
