Basic Installation and Configuration
43
ProSAFE Dual Band Wireless N Access Point WNDAP350
you selected displays. When the Security Profile screen displays, check the check box of the
Security Profile you want to modify and click Edit.
Figure 20. Configure WPA with RADIUS
5. Choose WPA with RADIUS from the from the Network Authentication drop-down menu.
Data Encryption will be set to TKIP by default.
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7. Click Apply to save your settings.
Configuring WPA2 with RADIUS
Not all wireless adapters support WPA2. Furthermore, client software is required on the
client. Make sure your client card supports WPA2. Consult the product document for your
wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.
Figure 21. Configure WPA2 with RADIUS
To Next Page
Loading...
Need help?
General
