Management
66
ProSAFE Dual Band Wireless N Access Point WNDAP350
To view the list of known APs:
1. Under the Monitoring tab on the main menu, select Rogue AP. Select Known AP List.
The following screen displays with a list of known APs:
Figure 42. Known APs list
2. Click Refresh to refresh the list.
3. Click Save to export the list of known APs to a file. A window opens so you can browse to
the location where you want to save the file.
Packet Capture
The packet capture option is available under the Monitoring > Packet Capture tab. Use this
option for troubleshooting association problems. You can capture all packets transmitted and
received by the AP and save them in
pcap format for analysis by any standard sniffer tool
such as WireShark or OmniPeek.
The packet capture screen is shown below.
Figure 43. Packet capture screen
To Next Page
Loading...
Need help?
General
