EasyManuals Logo

NETGEAR WNDAP350 User Manual

NETGEAR WNDAP350
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Basic Installation and Configuration
39
ProSAFE Dual Band Wireless N Access Point WNDAP350
- Port Number. The port number of the RADIUS Server. The default is 1812.
- Shared Secret. This is shared between the Wireless Access Point and the
RADIUS Server while authenticating the supplicant (wireless client).
Accounting Server. This configuration is required for accounting using a RADIUS
Server. The IP Address, Port Number, and Shared Secret are required for
communication with the Primary RADIUS Server. You can also configure a
Secondary RADIUS Server to use if the Primary RADIUS Server fails.
- IP Address. The IP address of the RADIUS Server.
- Port Number. Port number of the RADIUS Server. The default: 1813
- Shared Secret. This is shared between the Wireless Access Point and the
RADIUS Server while authenticating the supplicant (wireless client).
4. Click Apply to save your settings.
Setting up a Security Profile
The WNDAP350 allows you to set up eight different security profiles for 802.11b/bg/ng and
eight different profiles for 802.11a/na. Each profile can be configured with a different security
option for network authentication.
Note: If you are using a RADIUS Server, configure the RADIUS settings first,
as described in the Configuring the RADIUS Server Settings on page 38.
Figure 17. Security profile settings

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WNDAP350 and is the answer not in the manual?

NETGEAR WNDAP350 Specifications

General IconGeneral
BrandNETGEAR
ModelWNDAP350
CategoryWireless Router
LanguageEnglish

Related product manuals