Management
55
ProSAFE Dual Band Wireless N Access Point WNDAP350
Restoring Saved Settings
To restore your settings from a saved configuration file:
1. Under the Maintenance tab on the main menu, select Upgrade, then select Restore
Settings from the sidebar to back up your current settings. The following screen
displays:
\
Figure 32. Restore Configuration settings from file
2. Enter the full path to the file on your computer or click the Browse button to locate the file.
3. When you have located the file, click Restore to upload the file. After completing the upload,
the WNDAP350 will reboot automatically.
Restoring the WNDAP350 to the Factory Default Settings
It is sometimes desirable to restore the wireless access point to the factory default settings.
This can be done by using the Restore Defaults option, which restores all factory settings.
To restore the factory default settings:
1. Under the Maintenance tab on the main menu, select Reset, and then select Restore
Defaults from the sidebar. The Restore Defaults screen displays, as shown in
Figure 33, Restore to factory defaults below.
To Next Page
Loading...
Need help?
General
