Security
132
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
The Private VLAN link contains links to the following pages:
• Private VLAN Type Configuration
• Private VLAN Association Configuration
• Private VLAN Port Mode Configuration
• Private VLAN Host Interface Configuration
• Private VLAN Promiscuous Interface Configuration
Private VLAN Type Configuration
To display the Private VLAN Type Configuration page:
1. Click Security > T
raffic Control> Private VLAN > Private VLAN Type Configuration.
2. Use Private VLAN T
ype to specify the type of Private VLAN. The following options are
available:
• Unconfigured: No Private VLAN type.
This is the default setting and means that this
VLAN is not part of the Private VLAN configuration
• Primary: Used to allow Layer 2 connectivity from promiscuous ports to isolated ports
and to community ports.
• Isolated: Used to allow isolated ports to send traf
fic to the primary VLAN/
Promiscuous ports.
• Community: Used to allow Layer 2 connectivity from community ports to
promiscuous ports and to community ports of the same community
.
3. If you make changes to the page, click Apply to apply the changes to the system.
Configuration changes take ef
fect immediately.
Field Description
VLAN ID Specifies the VLAN ID for which Private VLAN type
is being set.
The default is 'Unconfigured'.
The following field is displayed:
Private VLAN Association Configuration
To display the Private VLAN Association Configuration page:
1. Click Security > T
raffic Control> Private VLAN > Private VLAN Association
Configuration.
2. Use Primary VLAN to select the primary VLAN ID of the domain.
This is used to associate
Secondary VLANs to the domain.
3. Use Secondary VLAN(s) to display all the statically created VLANs (excluding the primary
and default VLANs).
This control is used to associate secondary VLANs - isolated and
community, to the selected primary VLAN. A single, isolated VLAN and multiple community
VLANs can be associated to a single primary VLAN.
To Next Page
Loading...
