5-36 BA 6001/9001/10001 En – Edition 2.0 * * 6001b540.fm
Maintenance
Check exhaust system for damage and condition
● ●
Check valve tip clearance. Adjust if necessary
●
Fuel injection pump
●
Injection and pressure
●
Check injection nozzles and valves
6
●
Empty diesel fuel tank
●
Check battery electrolyte. Fill up with distilled water if necessary
● ● ●
Tyre check (damage, air pressure, tread depth)
● ●
Wheel nuts
● ●
Check alternator, starter and electric connections, bearing play and function
●
Preheating system, electric connections
●
Pressure check of primary pressure limiting valves
7
● ●
Check piston rods for damage
● ●
Check screws for tightness
● ●
Pin lock
● ●
Line fixtures
● ●
Check telltales for correct function
● ●
Insulating mats in engine compartment
● ●
Cleanliness of access
● ●
Adhesive labels and Operator's Manual
● ●
Engine cover gas strut
● ●
Lubrication service ( ):
Lubricate the following assemblies/components – see Lubrication plan on page 5-38:
5.15 Maintenance plan (overview)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment
manufacturer as well.
Maintenance plan/service hours (s/h)
Maintenance work
(once a day)
Every 50 s/h
Every 500 s/h
Once a year or after 1000 s/h
After 1500 s/h
Customer
To Next Page