BA 6001/9001/10001 En – Edition 2.0 * 6001b610.fm 6-1
Specifications
6 Specifications
6.1 Chassis
Sturdy steel sheet chassis, rubber-mounted engine
6.2 Engine
6.3 Travelling drive
Engine Model 6001 Models 9001/10001
Up to serial number
AA60080D
Up to serial
number AD
From serial
number AD
Up to serial number
AA91012F
From serial
number AB91013F
Product Perkins diesel engine
Deutz diesel
engine
Perkins diesel engine
Type 1004 1104 C-44 TD2011 L04 1004 1104 C-44 T
Design Water-cooled 4 stroke diesel engine
No. of cylinders 4
Displacement
3990 cm³
243.5 in
3
4400 cm³
268.5 in
3
3619 cm³
220.8 in
3
3990 cm³
243.5 in
3
4400 cm³
268.5 in
3
Nominal bore and stroke
103 x 127 mm
4.0’’ x 5.0’’
105 x 127 mm
4.1’’ x 5.0’’
96 x 125 mm
3.8’’ x 4.9’’
100 x 127 mm
3.9’’ x 5.0’’
105 x 127 mm
4.1’’ x 5.0’’
Output
60 kW +/- 5 % at
2200 rpm
61.5 kW +/- 5 % at
2200 rpm
64.6 kW at
2600 rpm
74.5 kW +/- 5 % at
2200 rpm
74.5 kW +/- 5 % at
2200 rpm
Interm. torque
290 Nm at
1200 rpm
308 Nm at
1200 rpm
266 Nm at
1600 rpm
412 Nm at
1400 rpm
415 Nm at
1350 rpm
Max. engine speed without
load
2200 rpm +/- 25 rpm
2350 rpm +/- 25
rpm
2660 rpm +/- 25
rpm
2200 rpm +/- 25
rpm
2330 rpm +/- 25
rpm
Idling speed 1000 rpm +/- 25 rpm
~ 1000 rpm +/- 25
rpm
~ 900 rpm +/- 25
rpm
1000 rpm +/- 25
rpm
~ 1000 rpm +/- 25
rpm
Fuel injection system Direct injection
Starting aid
Preheater
(preheating time 15
seconds)
Glow plugs Glow plugs
Preheater
(preheating time 15
seconds)
Glow plugs
Max. inclined position
(engine no longer supplied
with oil):
30° in all directions
35° in all
directions
30° in all directions 35° in all directions
Exhaust values according to Tier 1
97/68/EC – tier 2
EPA tier 2
Tier 3 Tier 1
97/68/EC – tier 2
EPA tier 2
Variable displacement pump
Model 6001 Models 9001/10001
Up to serial number AD From serial number AD
Design
Not installed/
manual gearbox
Axial piston pump
Not installed/
manual gearbox
Displacement
- 71 cm³/rev (4.3in
3
/ rev) -
Flow rate
- 184 l/min (48.6 gpm) -
Max. service pressure
- 450 bar (6526 psi) -
Boost pump (integrated in variable displacement pump)
Design
- Gear pump -
Displacement
- 19.6 cm³ (1.2 in
3
) -
Charging/boost pressure
- 25 bar(362.6 psi) -