BA 6001/9001/10001 En – Edition 2.0 * 6001b330.fm 3-31
Operation
Tank for washer system
The tank is located at the rear right of the cab
Fill with clean tap water only!
Add a suitable cleaning agent if required.
In winter: add antifreeze for washer systems to the water.
Refer to the antifreeze instructions for further information on concentrations.
The rubber diaphragm in the non-return valve in the housing conglutinates if
stored in a dry condition over a longer period of time. In order to restore this
valve's function, moisten this non-return valve, dip it briefly in water and then blow
air through it.
Fig. 30: Tank for washer system
To Next Page
Loading...