BA 6001/9001/10001 En – Edition 2.0 * 6001b330.fm 3-23
Operation
3.9 Parking the machine
Always park the machine on firm ground!
☞ Select a level surface
☞ Stop the machine
☞ Move drive lever A to neutral position
☞ Lower the skip
☞ Apply the parking brake
☞ Switch off the ignition
☞ If parking the machine on a slope cannot be avoided, place wheel chocks under the
wheels to make sure the machine will not roll away under its own weight.
Never switch off the engine under full load, otherwise it can be damaged due
to overheating. Let the engine briefly run at idling speed with no load before
you switch it off.
Secure the machine against unauthorised operation!
• Remove the key.
To Next Page
Loading...