STMXMN-n?
Statistics Buffer Max-Min Query
Syntax:
STMXMN-n?
where n
is
either
A
or
B
Parameters:
None
Function:
This query returns the difference between the maximum and minimum
readings in the statistics buffer
of
the specified channel.
Returns: <mxmn>
<mxmn>
is
of
type <number> in exponent notation.
Related Commands: STMAX-n?, STMEAN-n?, STMIN-n?, STMXMN-n,
STSIZE-n, STSIZE-n?
STSDEV-n?
Statistics Buffer Standard Deviation Query
Syntax:
STSDEV-n?
where
n
is
either
A
or
B
Parameters:
None
Function:
This query returns the standard deviation
of
the readings in the statistics
buffer
of
the specified channel.
<stddev>
is
of
type <number> in exponent notation.
Related Commands: STMAX-n?, STMEAN-n?, STMIN-n?, STMXMN-n,
STSIZE-n, STSIZE-n?
STSrzEn
Statistics Buffer Size Select
Syntax:
STSIZE-n
<size>
where n
is
either
A
or
B
Parameters:
The parameter <size>
is
of
type <number> which rounds to
an
integer in the
range of
0
to
100.
The parameter represents the size
of
the statistics buffer.
Function:
This command sets the size
of
the buffer used for calculating real-time statis-
tics. The contents
of
this buffer are updated every time a reading
is
taken.
The statistics buffer
is
cleared automatically when this command is issued or
when the acquisition mode or units are changed.
If
the buffer size
is
set to
0
then the statistics are disabled and no statistical information will be main-
tained.
Related Commands: STMAX-n?, STMEAN-n?, STMIN-n, STSIZE-n?,
STSDEV-n?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
