STORELn?
Store Reference Reading Query
Syntax:
STOREF-n?
where n is either
A
or
B
Parameters:
None
Function:
This query returns the latest reading stored
as
a reference reading. The units
of the reference reading defaults to Watts.
Returns:
<number>
<number> is a floating point number in the exponential format.
Related Commands:
REFSELn, REBEL-n?, USRREFn, USRREF-n?, STOREF-n
STOZERO-n
Store
Zero
Signal
Syntax:
STOZERO-n
where n
is
either
A
or
B
Parameters:
None
Function:
This command takes the latest reading and stores it as a zero signal reference
value to be used when zeroing
is
enabled. The units of the zero reference
defaults to Amperes.
Related Commands:
ZERO-n, ZERO-n?, ZEROVAL-n?
TRIGOUT
Trigger Out Mode Select
Syntax:
TRIGOUT <mode>
Parameters:
The parameter <mode> is of type <string>. The valid values for this parameter
are listed below.
"CMPLT specifies conversion complete mode
"FREQ" specifies frequency mode
"LVL" specifies level comparator mode
"OFF specifies off mode
Function:
This command determines in which mode the trigger out output on the back
panel will operate.
Certain modes require additional parameters to be set.
Related Commands:
TRIGOUT, TRIGOUT?, TRIGOUTFREQ, TRIGOUTFREQ?,
TRIGOUTLVL, TRIGOUTLVL?, TRIGOUTPOL, TRIGOUTPOL?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
