Newport 2832-C - Page 88

TRIGOUT?
Trigger Out Mode Query
Syntax:
TFUCOUT?
Parametem: None
Function:
This query returns the current mode of the trigger out output.
Returns: <mode>
<mode>
is of type <string> in the double quote format.
Related Commands: TRIGOUT, TRIGOUTFREQ, TRIGOUTFREQ?,
TRIGOUTLVL, TRIGOUTLVL?, TRIGOUTPOL, TRIGOUTPOL?
TRIGOUTRlEQ
Trigger Out Frequency Select
Syntax:
TRIGOUTFREQ &eq>
Parametem:
The parameter <freq> is of type <number>. The range of this number is 0.001
to 1000Hz.
Function:
This command is used to set the frequency at which a pulse is output, on the
TTL OUT line, in trigger out frequency mode.
Related Commands: TRIGOUT, TRIGOUT?, TRIGOUTFREQ?, TRIGOUTINTG,
TRIGOUTLVL, TRIGOUTLVL?, TRIGOUTPOL, TRIGOUTPOL?
TRIGOUTFREQ?
Trigger Out Frequency Query
Syntax:
TFUCOUTFREQ?
Parametem: None
Function:
This query returns the trigger out pulse frequency used during trigger out
frequency mode.
Returns: <freq>
<freq>
is of type <number> in exponent notation with units of hertz.
Related Commands: TRIGOUT, TRIGOUT?, TRIGOUTFREQ, TRIGOUTINTG,
TRIGOUTLVL, TRIGOUTLVL?, TRIGOUTPOL, TRIGOUTPOL?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com