Newport 2832-C User Manual

USRREF-n?
User Defined Reference Value Query
Syntax:
USRREF-n?
where n is either
A or B
Parameters: None
Function:
This query returns the user defined reference value. This value will be in
Watts.
Returns: <refval>
<refval>
is of type <number> in exponential notation.
Related Commands: REFSEL-n, REFSEL-n?, STOREF-n, USRREF-n
USRRESPp
User Responsivity Factor Select
Syntax:
USRRESP-n <vab
where n is either A or B
Parameters:
The parameter <val> is of type <number>. The units of this parameter match
the responsivity units of the detector in use.
Function:
This command is used to define a responsivity factor that will be used by the
2832-C in measurement calculation when user calibration
is enabled.
Related Commands: ATTN-n, ATTN-n?, LAMBDA-n, LAMBDA-n?, RESP-n?,
USRCAL-n, USRCAL-n?, USRRESP-n?
USRRFSP-n?
User Responsivity Factor Query
Syntax:
USRRESP-n?
where n is either
A or B
Parameters: None
Function:
This query returns the user defined responsivity factor that will be used by
the 2832-C in measurement calculation when user calibration is enabled.
Returns: <vab
<val>
is of type <number> and represents a floating point number. The units
of <vab match the responsivity units of detector in use.
Related Commands: ATTN-n, ATTN-n?, LAMBDA-n, LAMBDA-n?, RESP-n?,
USRCAL-n, USRCAL-n?, USRRESP-n
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Newport 2832-C Specifications

General

Brand	Newport
Model	2832-C
Category	Measuring Instruments
Language	English