Nexcom VTC 7260 - GPIO Pull High Selection Switch; CAN Terminator Resistor Selection Switch

Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
27
Chapter 3: Jumpers and Connectors
VTC 7260 Series User Manual
CAN Terminator Resistor Selection Switch
Connector location: SW6
GPIO Pull High Selection Switch
Connector type: 2x8 16-pin DIP switch
Connector location: SW4
Pin Definition
1-4 ON GP1-4 Pull High Voltage by Vin (Default)
1-4 OFF GPI-4 Float
5-8 ON GPO1-4 Pull High Voltage by Vin (Default)
5-8 OFF GPO1-4 Float
Pin Definition
1 ON 2 ON CAN Terminator Resistor (Default)
1 OFF 2 OFF CAN None Terminator Resistor
1
O N
2345678
1
O N
2