Nexus 1250 - Page 11

Doc# E107706 TOC-3
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Table of Contents
9: External I/O Modules 9-1
9.1: Hardware Overview 9-1
9.1.1: Port Overview 9-2
9.2: I/O Module Installation 9-3
9.2.1: Power Source for I/O Modules 9-3
9.3: Using the PSIO with Multiple I/O Modules 9-4
9.3.1: Steps for Attaching Multiple I/O Modules 9-5
9.4: Factory Settings and Reset Button 9-7
9.5: Analog Transducer Signal Output Modules 9-8
9.5.1: Overview 9-9
9.5.2: Normal Mode 9-9
9.6: Analog Input Modules 9-10
9.6.1: Overview 9-10
9.6.2: Normal Mode 9-11
9.7: Digital Dry Contact Relay Output (Form C) Module 9-12
9.7.1: Overview 9-12
9.7.2: Communication 9-13
9.7.3: Normal Mode 9-13
9.8: Digital Solid State Pulse Output (KYZ) Module 9-14
9.8.1: Overview 9-14
9.8.2: Communication 9-15
9.8.3: Normal Mode 9-15
9.9: Digital Status Input Module 9-17
9.9.1: Overview 9-17
9.9.2: Communication 9-18
9.9.3: Normal Mode 9-18
10:
Meter with Internal Modem Option (INP2) 10-1
10.1: Hardware Overview 10-1
10.2: Hardware Connection 10-1
10.3: Dial-In Function 10-2
10.4: Dial-Out Function 10-2
11:
Meter with Internal Network Option (INP200) 11- 1
11.1: Hardware Overview 11-1
11.2: Network Connection 11-2
12:
Flicker and Analysis 12-1
12.1: Overview 12-1
12.2: Theory of Operation 12-1
12.2.1: Summary 12-3
12.3: Flicker Setting (Nexus® 1250 meter and 1252 V-1) 12-4
12.4: Flicker Polling Screen 12-6
12.5: Logging 12-10
12.6: Polling through a Communication Port 12-10
12.7: Log Viewer 12-10
12.8: Performance Notes 12-11
12.9: EN50160/IEC61000-4-30 Power Quality Compliance Analysis
(Nexus® 1252 meter with V-2) 12-12
12.9.1: EN50160/IEC61000-4-30 Configuration 12-12
12.9.2: EN50160/IEC61000-4-30 Analysis 12-14