Doc# E107706 9- 13
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
9: External I/O Modules
The Modbus Map for the Analog Output Module (and operating details) can be found in
the Modbus Communicating I/O Modules Manual.
Each latching relay will hold its state in the event of a power loss.
9.7.2: Communication
Maximum registers per request, read or write, is 4 registers.
The device will operate with the following default parameters:
Address: 247 (F7H)
Baud Rate: 57600 Baud
Transmit Delay Time: 20 msec
Some situations will cause the device to operate with the above Default Parameters.
See Section 9.4 for details of Default Mode.
9.7.3: Normal Mode
Normal Mode consists of one process: the device accepts new commands to control
the relays.
To Next Page
Loading...
