Nikon CAPTURE NX2 - Revert; Protect File; Close; Page Setup

Chapter 18 — File Menu | Revert 163
Revert
Select the Revert option to remove any changes from the file that were made since the last Save or Save
As operation.
Protect File
Protected images cannot be edited within Capture NX 2. Protection can be turned on within the camera or
within another Nikon image editing application. To turn off protection and enable the image to be edited
by Capture NX 2, select the Protect File item to uncheck it.
Close
The Close option closes the current image. If there are any unsaved changes made to the image, you will be
provided with an option of saving those changes.
Page Setup…
The “Page Setup” dialog provides you with controls for setting up your printer and print environment. With
this option, you can set the paper size, paper source, and orientation, as well as other options which depend
on the printer and operating system. It is recommended that you open and adjust the settings within the
“Page Setup” dialog prior to selecting Print.
Shortcut
Ctrl + W (Windows)
command + W (Macintosh)
Shortcut
Ctrl + Shift + P (Windows)
command + shift + P (Macintosh)