212 Chapter 21 — Filter Menu | Photo Effects
Tinted
The Tinted method emulates the effect of printing a black
and white negative on color paper, while using different
colored filters to change the overall hue of the image.
The following controls are provided within the Tinted
method:
Brightness
The Brightness slider enables you to control the tonality
throughout your image. Move this slider to the left to
darken your image or to the right to brighten the image.
Enhance Dark Tones
The Enhance Dark Tones checkbox brings out additional
detail in the shadows of the active image.
Auto
When you click on the Auto button, Capture NX 2 will analyze the image and determine a recommended
setting for the Brightness slider. It will also determine automatically whether to enable the Enhance
Dark Tones option or not.
Cyan — Red
The Cyan — Red slider enables you to control the amount of cyan or red in the filter being used. Moving
this slider to the left removes red from the filter, causing the filter and the image to become more cyan.
Adjusting this slider to the right adds red to the filter and the image.
Magenta — Green
The Magenta — Green slider enables you to control the amount of magenta or green in the filter being
used. Moving this slider to the left removes green from the filter, causing the filter and the image to
become more magenta. Adjusting this slider to the right adds green to the filter and the image.
Yellow — Blue
The Yell ow — Blue slider enables you to control the amount of yellow or blue in the filter being used.
Moving this slider to the left removes blue from the filter, causing the filter and the image to become more
yellow. Adjusting this slider to the right adds blue to the filter and the image.
To Next Page
Loading...
Need help?
General
