Nilfisk-Advance SC2000 - Machine Settings Screen

Control System 28Service Manual – SC2000
Machine Settings Screen
The machine settings screen (Figure 9) functions allow you to customise some parameters described in the
following table of modiable parameters.
1. Press the vacuum system button to increase the value of the current parameter.
2. Press the brush engagement/disengagement button to decrease the value of the current
parameter.
3. To move to the next parameter press the One-Touch button , or hold it for 1 second to return to
the main screen (Figure 6).
Figure 9
MODIFIABLE PARAMETERS
Code Description Min. Value Factory Setting Max. Value
CHM1 Detergent concentration level 1
1:500 (0.25 %) 1:500 (0.25 %) 1:33 (3 %)
CHM2 Detergent concentration level 2 1:500 (0.25 %) 1:125 (0.80 %) 1:33 (3 %)
P1/P3
Level 1 solution ow rate in relation to level 3
(see “System for Flow Rate Regulation as Function of Speed”
paragraph)
0 % 25 % 100 %
P2/P3
Level 2 solution ow rate in relation to level 3
(see “System for Flow Rate Regulation as Function of Speed”
paragraph)
0 % 50 % 100 %
P3 Level 3 solution ow rate 1.0 cl/m 3.0 cl/m 5.0 cl/m
P4 Level 4 enabling (2.8 l/min regardless of speed) OFF OFF ON
SPT EcoFlex function timer 0 (disabled) 60 sec. 300 sec.
XPRES Brush deck extra pressure enabling OFF ON ON
FVMAX Maximum forward speed 10 % 100 % 100 %
RVMAX Maximum reverse speed 10 % 30 % 50 %
WSMIN Minimum working speed 10 % 25 % 100 %
WSMAX Maximum working speed 10 % 100 % 100 %
BRK Electromagnetic brake activation delay 0 sec. 3 sec. 5 sec.
BAT Installed battery type 0 1 5
TOFF Automatic shut-off time 0 (disabled) 300 sec. 600 sec.
BRGH Display contrast 5 20 50
VRID Vacuum power in silent mode 1 1 5
RPM (*) Reduced brush rpm activation threshold 5 9 20
RESET Restore factory settings for all parameters OFF OFF ON
(*) Increase the value of this parameter to reduce the brush motor speed in a wider range of applications and
vice versa