Nilfisk-Advance SC2000 Service Manual

General Information
6
Service Manual – SC2000
Conventions
Forward, backward, front, rear, left or right are intended with reference to the operator’s position, that is to
say in driving position.
Service and Spare Parts
Service and repairs must be performed only by authorised personnel or Nilsk or Advance Service Centers.
The authorised personnel is trained directly at the manufacturer’s premises and has original spare parts and
accessories.
Contact Nilsk or Advance Retailer indicated below for service or to order spare parts and accessories, specify-
ing the machine model and serial number.
(Apply Retailer label here)
Serial Number Label
Reference to Figure 1
The machine serial number and model name are
marked on the plate (see the example to the side).
Product code and year of production are marked
on the same plate.
This information is useful when requiring ma-
chine spare parts. Use the following table to
write down the machine identication data.
Battery 24 Vdc
63 A
Charg.100-240Vac 50-60Hz
Model: Scrubber-Dryer SC2000 20 B
Prod. Nr: 9087361020
GVW: 400 kg/882 lb
Type E Floor cleaning machine
Serial No: ..................
Date code: .......
LpA = 65 dB(A)
IPX4
2%
“Made in Hungary”
Nilfisk-Advance, Inc.
Plymouth, MN, USA
www.advance-us.com
UL STD 583
CSA STD C22.2 N.68-92
3084826
Control Nr:
A Nilfisk-Advance Brand
Figure 1
MACHINE model .............................................................................................
PRODUCT code ..............................................................................................
MACHINE serial number .................................................................................

Nilfisk-Advance SC2000 Specifications

General

Brand	Nilfisk-Advance
Model	SC2000
Category	Floor Machine
Language	English