Solution System 77Service Manual – SC2000
Maintenance and Adjustments
Cleaning the Solution Tank and Filter
1. Drive the machine on a level oor.
2. Ensure that the machine is off and the operator
key has been removed.
3. Close the solution tank valve.
4. Remove the transparent cover (A, Figure 5),
retrieve the gasket (B), then remove the lter
strainer (C). Wash and rinse them with water,
then ret them carefully onto the lter support
(D).
5. Open the solution tank valve.
A
C
B
D
Figure 5
To Next Page
Loading...
