Need help?Do you have a question about the Nitty-Gritty Clinox PRO x2 and is the answer not in the manual?
Details necessary safety gear like overalls, gloves, and eye protection for handling electrolyte solutions.
Explanation of built-in thermal and short-circuit protection mechanisms within the device.
Instructions for immediate actions in case of accidental exposure to electrolyte solutions or fumes.
Describes the device's capabilities for pickling, polishing, and electrochemical marking of stainless steel.
Guidelines for safely transporting and storing the device to protect its components.
Identifies and labels the main parts and connectors of the device and torch.
Instructions on how to correctly attach the torch support to the main unit.
Overview of the display, buttons, and indicators on the device's control panel.
How to select and adjust the power output level (High, Mid, Low) for different applications.
Guides on setting the pump speed and mode (Off, Dynamic, Manual, Timed).
Lists common alarm messages and their probable causes and resolutions.
Catalog of available inserts and brushes for the torch, with compatibility for different models.
Step-by-step instructions for attaching inserts or brush adapters to the torch coupling.
Instructions for fitting felt pads onto 100 mm and 45 mm graphite inserts using O-rings.
Guidance on attaching Clinox Brush M, L, L flat, and XL to the brush adapter.
Essential checks before operating the device to prevent damage and ensure safety.
Instructions for safely filling the device's tank with the appropriate electrolyte solution.
Steps for connecting the earth cable and the device power cord to the power supply.
Procedure for starting cleaning or polishing, including selecting mode, power, and accessories.
Steps to take after completing cleaning or polishing, including shutdown and cleaning.
Lists available inserts and brushes for the manual torch.
Instructions for fitting inserts and brush adapters onto the manual torch.
Procedure for initiating cleaning/polishing operations using the manual torch.
Lists available accessories for the D&W torch.
Instructions for fitting inserts and brush adapters onto the D&W torch.
Procedure for initiating cleaning/polishing operations using the D&W torch.
Lists available accessories for the marking torch, including inserts and screens.
Steps to install the graphite marking insert into the marking torch.
Procedure for performing electrochemical marking on stainless steel surfaces.
Daily checks and cleaning tasks to ensure optimal device performance and longevity.
Describes maintenance operations typically performed by authorized technicians.
Guidelines for the proper disposal of packaging, used felts, waste liquids, and obsolete equipment.
General| Brand | Nitty-Gritty |
|---|---|
| Model | Clinox PRO x2 |
| Category | Welding System |
| Language | English |
To Next Page