42
NITTY GRITTY.IT
make it shine
A
A
B
C
CLINOX PRO • AIR • POWER • SURFACE
USER MANUAL
7.8.
• Use the supplied cable (A) to carry out the electrical installation of the manual torch; connect one end to the appropriate
coupling on the manual torch (B) and the other to the dedicated bushing on the front panel of the device (C).
Acid solutions are dangerous and can cause damage to people and property: please read carefully the chapter
1 on the safety regulations and personal protective equipment that must be used when working with these
substances.
• Before starting to pickle / polish a piece of stainless steel, check that all the preliminary operations described in chapter 5
have been carried out correctly.
• Make sure the most appropriate accessory is installed on the torch for the type of processing to be performed.
• Choose the most appropriate liquid for the type of processing to be carried out:
◊ BRILL BOMAR, suitable for both pickling and polishing.
◊ STANDARD BOMAR, suitable only for pickling.
◊ TIG BOMAR, suitable only for pickling.
◊ NEUTRAL BOMAR, suitable only for pickling.
Always refer to the product data sheet for detailed indications regarding its eld of use.
N
ITTY-GRITTY Customer Service (info@nitty-gritty.it) is available for any additional information.
• Turn on the device by turning the main switch (located on the back of the unit) to the "I" position.
• Select the desired operating mode by pressing the MODE button on the control panel (see chapter 3.3 for more information).
7.9.
To Next Page
Loading...