40
NITTY GRITTY.IT
make it shine
max
15 mm
A
C
B
D
CLINOX PRO • AIR • POWER • SURFACE
USER MANUAL
7.6.
• Install the brush adapter (A) on the manual torch (see chapter 7.2).
• The adapter is equipped with a threaded coupling (B) on which to screw the brush. Be careful when threading the end of
the brush tube (C).
• Adjust the brush bushing (D) to ensure that no more than 15 mm of carbon bres are exposed.
When installing the brushes, the manual torch must not be connected to the device.
To Next Page
Loading...