3
Click Save.
END OF STEPS
7.25 Configuring GRE tunnel
Note: This feature is available to admin users (super users) only.
1
Click Network→GRE Tunnel from the left pane in the GPON Home Gateway page. The GRE
Tunnel page displays.
2
Configure the following parameters:
Table 7-18 GRE Tunnel parameters
Field Description
Tunnel Name Select Create new GRE Tunnel or select an existing tunnel from the list.
The tunnel name is automatically assigned by the system.
Up to 4 GRE tunnels are supported.
Figure 7-22 GRE Tunnel page
Configure a G-2425G-B indoor ONT
Network configuration
Configuring GRE tunnel
7368 ISAM ONT
Draft Draft
August 2020
Issue 4 109
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
To Next Page
Loading...
