3
Click Add.
END OF STEPS
7.38 Configuring port triggering
1
Click Application→Port Triggering from the left pane in the GPON Home Gateway page. The
Port Triggering page displays.
2
Configure the following parameters:
Table 7-33 Port Triggering parameters
Field Description
Application Name Select an application name from the list.
The default is Custom settings.
Open Port Enter the open port range.
Figure 7-36 Port Triggering page
Configure a G-2425G-B indoor ONT
Configuring the Application
Configuring port triggering
7368 ISAM ONT
Draft Draft
August 2020
Issue 4 131
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
To Next Page
Loading...
Need help?
General
