Table 7-30 Access Control parameters
Field Description
WAN Select a connection from the list.
Trusted Network Enable Click to enable or disable trusted network.
ICMP, Telnet, SSH, HTTP, TR-069, HTTPS,
SFTP
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
3
Click Save.
4
Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
Table 7-31 Trusted Network parameters
Field Description
Trusted Network
Source IP Start Enter a start IP address for the new subnet trusted network.
Source IP End Enter an end IP address for the new subnet trusted network.
5
Click Add.
END OF STEPS
Configure a G-2425G-B indoor ONT
Security configuration
Configuring access control
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
August 2020
128 Issue 4
To Next Page
Loading...
