2
Configure the following parameters:
Table 7-28 ALG parameters
Field Description
ALG Config Select the checkboxes to enable the protocols to be supported by the ALG: FTP, TFTP, SIP, H323,
RTSP, L2TP, IPSEC, PPTP.
3
Click Save ALG.
4
Configure the following parameters:
Table 7-29 DMZ parameters
Field Description
WAN Connection List Select a WAN connection from the list.
Enable DMZ Select this checkbox to enable DMZ on the selected WAN connection.
DMZ IP Address Select Custom Settings and enter the DMZ IP address or select the IP address of a connected
device from the list.
Figure 7-33 DMZ and ALG page
Configure a G-2425G-B indoor ONT
Security configuration
Configuring DMZ and ALG
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
August 2020
126 Issue 4
To Next Page
Loading...
