7.46 Configuring LOID
1
Click Maintenance > LOID Config from the left pane in the GPON Home Gateway page. The
LOID Config page displays.
2
Configure the following parameters:
Table 7-39 LOID Configuration parameters
Field Description
LOID Enter the LOID; the maximum number of characters is 24
If the password is null, this field may be left blank.
Password Enter the password; the maximum number of characters is 12.
3
Click Save/Apply.
END OF STEPS
Figure 7-43 LOID Config page
Configure a G-2425G-B indoor ONT
Maintenance
Configuring LOID
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
August 2020
142 Issue 4
To Next Page
Loading...
Need help?
General
