• the first character cannot be a special character
• there are not enough character classes
1
Click Maintenance→Password from the left pane in the GPON Home Gateway page. The
Password page displays.
2
Configure the following parameters:
Table 7-38 Password parameters
Field Description
Original Password Enter the current password.
New Password Enter the new password (must adhere to the password rules).
Re-enter password Re-enter the new password (must match the new password entered above exactly).
Prompt message Enter the password prompt message.
3
Click Save.
END OF STEPS
Figure 7-42 Password page
Configure a G-2425G-B indoor ONT
Maintenance
Configuring the password
7368 ISAM ONT
Draft Draft
August 2020
Issue 4 141
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
To Next Page
Loading...
Need help?
General
