2
Configure the following parameters:
Table 7-27 Parental control parameters
Field Description
Access Control Select this checkbox to enable access control
Add Access Control rule
Click the plus sign (+) to add a policy.
A separate panel displays for configuring the policy name, IP address of the device, and dates and times for the policy.
Policy Name Enter a name for the parental control policy or select a policy from the list
MAC Address Enter the MAC address or select a MAC address from the list.
IPv4 Address Enter the IPv4 address for the device or select an IPv4 address from the list.
Url Port Enter the URL port for the device.
Days of week Select Every Day, or Individual Days and select the checkboxes for the days of the week for which the
policy applies.
From Enter the time for the policy to be in effect.
To
3
Click Save changes.
4
Click Enable to activate the policy.
END OF STEPS
7.34 Configuring DMZ and ALG
1
Click Security→DMZ and ALG from the left pane in the GPON Home Gateway page. The
DMZ and ALG page displays.
Configure a G-2425G-B indoor ONT
Security configuration
Configuring DMZ and ALG
7368 ISAM ONT
Draft Draft
August 2020
Issue 4 125
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
To Next Page
Loading...
Need help?
General
