Nokia 7368 Intelligent Services Access Manager ONT User Manual

1
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
a. Use the RTRV-ONT command to verify the ONT status and th associated services. Record
the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
b. If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2
If used, disable the Wi-Fi service by pressing the WLAN button; see Figure 6-1, “G-2425G-B
indoor ONT connections” (p. 66)
for the location of the WLAN button.
Figure 6-1 G-2425G-B indoor ONT connections
ON/OFF RESET WLAN
POWER
LAN4LAN3LAN2LAN1TEL2TEL1
USB1 USB2
LEDWPS
36083
POTS port
(RJ-11)
Ethernet
ports (4)
(RJ-45)
Power
Reset
button
Wi-Fi
security/
on/off buttons
On/off
button
USB
ports (2)
Fiber optic
port
Replace a G-2425G-B indoor ONT
Procedure
7368 ISAM ONT
Draft Draft
August 2020
Issue 4 67
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA

Nokia 7368 Intelligent Services Access Manager ONT Specifications

General

Brand	Nokia
Model	7368 Intelligent Services Access Manager ONT
Category	Touch terminals
Language	English