Maintenance
7.44 Overview
7.44.1 Purpose
This chapter describes the maintenance tasks supported by G-2425G-B ONTs.
7.44.2 Contents
7.44 Overview 140
7.45 Configuring the password 140
7.46 Configuring LOID 142
7.47 Configuring SLID 143
7.48 Managing the device 144
7.49 Backing up the configuration 145
7.50 Restoring the configuration 145
7.51 Upgrading firmware 146
7.52 Rebooting the device 147
7.53 Resetting to factory defaults 148
7.54 Diagnosing WAN connections 149
7.55 Viewing log files 151
7.45 Configuring the password
A password must adhere to the password rules, which are as follows:
• the password may consist of uppercase letters, lowercase letters, digital numbers, and the
following special characters ! # + , - / @ _ : = ]
• the password length must be from 8 to 24 characters
• the first character must be a digital number or a letter
• the password must contain at least two types of characters: numbers, letters, or special
characters
• the same character must not appear more than 8 times in a row
When the password meets the password rules, the application displays the message “Your
password has been changed successfully”.
When the password does not meet the password rules, the application displays a message to
indicate which password rule has not been followed, for example:
• the password is too short
• the password is too long
Configure a G-2425G-B indoor ONT
Maintenance
Overview
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
August 2020
140 Issue 4
To Next Page
Loading...
