7.40 Configuring NTP
1
Click Application→NTP from the left pane in the GPON Home Gateway page. The NTP page
displays.
2
Configure the following parameters:
Table 7-35 NTP parameters
Field Description
Enable NTP Service Select this checkbox to enable the NTP service.
Current Time Enter the current local date and time.
Primary Time Server Select a time server from the list or select Custom settings and enter the address of the time server.
Secondary Time Server Select a time server from the list or select Custom settings and enter the address of the time server.
Third Time Server Select a time server from the list or select Custom settings and enter the address of the time server.
Interval Time Enter the interval at which to get the time from the time server, in seconds.
Time Zone Select the local time zone from the list.
Figure 7-38 NTP page
Configure a G-2425G-B indoor ONT
Configuring the Application
Configuring NTP
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
August 2020
134 Issue 4
To Next Page
Loading...
Need help?
General
