IP390, 105i & 105s Security Platform Installation Guide 41
3 Performing the Initial
Configuration
The first time you turn power on to a Nokia appliance, the initial
configuration process begins. This process enables you to configure the
network settings and provides access to the admin account.
You can perform the initial configuration in two ways.
You can configure a DHCP server to provide the initial configuration
information the first time the appliance is started.
You can perform the initial configuration manually by using a console
connection.
This chapter describes how to perform the initial configuration manually by
using a console connection. It includes the following sections:
Using a Console Connection
Using Nokia Network Voyager
Using the Command-Line Interface
Using Nokia Horizon Manager
For information about how to use the DHCP client for initial configuration,
see the Read Me First document.
To Next Page
Loading...