IP390, 105i & 105s Security Platform Installation Guide 51
4 Installing and Replacing
Network Interface Cards
Your appliance comes with any network interface cards (NICs) you
ordered already installed. This chapter describes how to remove, add, or
replace NICs later if it becomes necessary.
The following topics are covered:
Deactivating Configured Interfaces
Removing, Installing, and Replacing NICs
Configuring and Activating Interfaces
Monitoring Network Interface Cards
For detailed information on specific NICs, see Chapter 5, “Connecting PMC
Network Interface Cards.”
Caution
You should have a working knowledge of networking equipment
before attempting to service an IP390 appliance. Limit service of the
unit to the procedures described in this chapter.
To Next Page
Loading...