6 Installing and Replacing Other Components
84 IP390, 105i & 105s Security Platform Installation Guide
8. Tighten the retaining screws that hold the chassis tray assembly.
Configuring a PC Card or Hard-Disk Drive for
Logging
On the appliance, you can save log files locally by installing and configuring an
optional disk (an external flash-memory PC card or hard-disk drive). The
Nokia Network Voyager Reference Guide and the CLI Reference Guide for
Nokia IPSO contain instructions for configuring a Nokia appliance to store
Nokia IPSO log messages on the disk. This section explains how to configure
an optional disk and configure it to store Check Point log messages on an
IP390.
Note
Nokia recommends that you do not save Check Point log files on a
flash-memory PC card. If possible, use a hard-disk drive for this purpose.
If you perform all the procedures explained in this document, you must reboot
your appliance several times.
00525
IP390
Chassis tray assembly retaining screws
To Next Page
Loading...