6 Installing and Replacing Other Components
78 IP390, 105i & 105s Security Platform Installation Guide
For example, to copy the current IPSO image from the compact flash
memory to the flash-memory PC card, use the following command:
cp /image/current/ipso.tgz /cdrom/
5. Use the following command to unmount the flash-memory PC card
before you eject it:
umount /cdrom
6. To remove the card, slowly push the eject button located to the left of the
card.
Hold the flash-memory PC card while you push the eject button to prevent the
card from ejecting too quickly.
Installing or Replacing a Hard-Disk Drive
You can add a single hard-disk drive to your appliance. The following
figure shows the location of the hard-disk drive on the motherboard.
Note
Back up your files to a remote system on a regular basis. For back up and
restore procedures, see the Getting Started Guide and Release Notes for
the version of Nokia IPSO you are using.
To Next Page
Loading...