6 Installing and Replacing Other Components
86 IP390, 105i & 105s Security Platform Installation Guide
For more information about storing Nokia IPSO system logs, see the Nokia
Network Voyager Reference Guide or the CLI Reference Guide for the version
of Nokia IPSO you are using.
For more information about storing Check Point log messages, see Important
Information: Storing Check Point Log Messages on Flash-Based Platforms.
Replacing or Upgrading Memory
The IP390 appliances have two dual inline memory-module (DIMM) sockets.
This section explains how to upgrade or replace the memory for either
appliance by using a Nokia-approved memory upgrade kit.
The IP390 comes with different memory configurations. Contact Nokia
customer support for more information on the supported memory
configurations.
Note
Nokia recommends that you obtain memory kits only from Nokia or
authorized resellers. For further information, contact the appropriate
Nokia customer support site listed “Nokia Contact Information” on page 3.
The DIMM sockets are located at the right of the motherboard, as you look at
the appliance from the front, as Figure 20 shows.
To Next Page
Loading...