Nokia EM7500 - Installing a Flash-Memory PC Card; Before You Begin

6 Installing and Replacing Other Components
76 IP390, 105i & 105s Security Platform Installation Guide
10. Turn on the power supply at the back of the appliance.
Installing a Flash-Memory PC Card
You can use the flash-memory PC card to store local system logs, Nokia IPSO
images, and configuration files.The appliance has two PCMCIA slots
that can support a flash-memory PC card having a capacity of 1 GB or higher.
Before You Begin
To install a flash-memory PC card, you need:
 Physical access to the appliance
 Access to the appliance by using Nokia Network Voyager or the
command-line interface (CLI)
 Compact flash memory PC card and accompanying documentation
Caution
To avoid potential equipment malfunction, Nokia recommends that
you obtain flash-memory PC cards only from Nokia or authorized
resellers. For further information, contact the appropriate Nokia
customer support site listed in Nokia Contact Information on page 3.
Caution
You risk damage to the appliance or loss of data if you do not use the
following procedure when you replace the flash-memory PC card.
Note
The flash-memory PC card comes formatted from the factory.
All manuals and user guides at all-guides.com
all-guides.com