4. Choose Tuning→Ambient Light Sensor Calibration.
Figure 51
Ambient Light Sensor Calibration
window
5. In the
Pull Up Resistor Calibration
pane, click Start, and Write.
6. In the
Ambient Light Sensor Calibration
pane, check the Use default values only check box, and click
Write.
7. To end the calibration, click Close.
RM-180
BB Troubleshooting and Tuning Guide Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 6 –47
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
