Nokia N72 Service Manual

ESD protection
Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing
the phone.
Any product of which the covers are removed must be handled with ESD protection. The SIM card can be
replaced without ESD protection if the product is otherwise ready for use.
To replace the covers ESD protection must be applied.
All electronic parts of the product are susceptible to ESD. Resistors, too, can be damaged by static electricity
discharge.
All ESD sensitive parts must be packed in metallized protective bags during shipping and handling outside
any ESD Protected Area (EPA).
Every repair action involving opening the product or handling the product components must be done under
ESD protection.
ESD protected spare part packages MUST NOT be opened/closed out of an ESD Protected Area.
For more information and local requirements about ESD protection and ESD Protected Area, contact your local
Nokia After Market Services representative.
RM-180
ESD protection Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page v
Copyright © 2006 Nokia. All rights reserved.

Nokia N72 Specifications

General

Panel type	TFT
Display diagonal	2.1 \
Display resolution	176 x 208 pixels
Display number of colors	262144 colors
Internal memory	20 MB
Zoom capability	20x
Rear camera type	Single camera
Rear camera resolution	1600 x 1200 pixels
Video capture resolution (max)	352 x 228 pixels
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Ringer type	Polyphonic
Form factor	Bar
Product color	Violet
Talk time (2G)	3.40 h
Battery capacity	970 mAh
Standby time (2G)	260 h
2G standards	GPRS

Weight and Dimensions

Depth	53 mm
Width	109 mm
Height	18 mm
Weight	124 g