DECLARATION of CONFORMITY
PRODUCT:
Models: Encore PE Manual Applicators for use with Encore or Encore LT Manual Controllers.
Description: This is a manual electrostatic powder spray system, including applicators, control cables and
associated controllers used for spraying porcelain enamel powders. The porcelain enamel powders are
non-flammable. The spray area is classified as non-hazardous.
Applicable Directives:
2006/42/EC − Machinery Directive
2014/30/EU − EMC Directive
2014/35/EU − Low Voltage Directive
Standards Used for Compliance:
EN/ISO12100 (2010) EN61000-6-3 (2007)
EN1953 (2009) EN61000-6-2 (2005)
EN60204 (2006) EN55011 (2009)
EM7260
Principles:
This product has been manufactured according to good engineering practice.
The product specified conforms to the directive and standards described above.
Applicator energy level is less than 2mJ.
DNV−ISO 9001
Date: 16 Aug 2016
Vance Wilson
Engineering Manager
Industrial Coating Systems
Nordson Authorized Representative in the EU
Person authorized to compile the relevant technical documentation.
Contact: Operations Manager
Industrial Coating Systems
Nordson Deutschland GmbH
Heinrich−Hertz−StraBe 42−44
D−40699 Erkrath
Nordson Corporation S Westlake, Ohio
DOC14037−04
To Previous Page
Loading...
Need help?
General
