Nordson FP-200 - Nozzle Parts List

Parts
8-19
Part 237478_03
E 2012 Nordson Corporation
Nozzle Parts List
The FP‐200 gun accommodates any standard H‐200 extrusion nozzle.
Table 8‐2 lists the part numbers for nozzles commonly used with the
FP‐200 gun.
Table 8‐2 Nozzles Commonly Used with the FP‐200 Gun
Nozzle Type Part No. Description Notes
Wide pattern
swirl nozzles
125 607 0.64mm(0.025 in.) orifice diameter One‐piece nozzle and nut assembly
Use with CF‐200 wide pattern module
(P/N 157 266)
131 998 0.76mm(0.030 in.) orifice diameter
131 635 1.17mm(0.046 in.) orifice diameter
Swirl nozzles 104 100 0.20mm(0.008 in.) orifice diameter Use with CS‐WF nozzle retaining nut
(P/N 119 202)
Use with CF‐200 wide pattern module
(P/N 157 266)
104 101 0.25mm(0.010 in.) orifice diameter
860 548 0.31mm(0.012 in.) orifice diameter
860 574 0.36mm(0.014 in.) orifice diameter
860 575 0.41mm(0.016 in.) orifice diameter
860 226 0.46mm(0.018 in.) orifice diameter
860 435 0.51mm(0.020 in.) orifice diameter
100 728 0.64mm(0.025 in.) orifice diameter
810 381 0.76mm(0.030 in.) orifice diameter
810 382 1.02mm(0.040 in.) orifice diameter
810 300 1.27mm(0.050 in.) orifice diameter
Extended
extrusion
nozzles
710 245 0.64mm(0.025 in.) orifice diameter 56mm(2.2 in.) engagement length
Use with H‐200 adjustable module
(P/N 276 119)
709 018 1.07mm(0.042 in.) orifice diameter
710 246 1.55mm(0.061 in.) orifice diameter
724 268 2.29mm(0.090 in.) orifice diameter
703 223 4.75mm(0.187 in.) orifice diameter